Belt conveyors complement machines used in bulk material handling and mining systems. They are used as the main component in bulk material transport systems.
Belt Conveyors Suitable for a Variety of Applications
Our conveyors can range from short distances up to approximately 20km, for a single flight, in length. Typical belt conveyors applications include:
- Boom conveyors/intermediate conveyors in stockyard machines, in mining machine systems and within ship loading and unloading facilities
- Belt feeders/feeder conveyors for hopper discharge
- In-plant conveyors
- Overland conveyors (stationary and shiftable) with or without horizontal curves
Conveying capacities can vary from about 100 t/h for various material handling applications up to 50,000 t/h for the handling of overburden in massive mining applications.
Designed to Suit Individual Project Requirements
Since every site application will place different demands on the the design of the belt conveyor system, TAKRAF is able to advise and assist you in determining the most suitable conveyor solution for your specific application. Leveraging our significant experience in bulk material handling, we are able to anticipate potential problems and overcomes these by designing our product specifically to your needs and requirements on site.
Material Handling System Compatability
We've been designing and installing bulk material handling systems across various applications, commodities and countries for about 100 years - this can be seen in our distinguished list of satisfied customers around the world.
Our positioning as a complete material handling systems provider allows us to design and install belt conveyors that are easily integrated into complex material handling systems within a mining operation including Bucket-Wheel Excavators (BWEs), crushing plants and In-Pit Crushing & Conveying (IPCC) solutions. Our conveying solutions also integrate well with downstream material handling solutions including overland conveyors, all stockyard equipment as well as all port logistics solutions.
We design, fabricate and supply a wide-range of belt conveyors ranging from capacities of 100 t/h to 50,000 t/h
- Our systems are specifically designed for our clients' unique requirements and can be either stationary or shiftable
Download Bulk Material Handling Brochure
Customer Project name Overland conveyor system Climax Molybdenum Co. Henderson mine in Granby, Colorado 1999
One of the largest conveyor systems in the world
Molybdenum ore has to be moved from the underground mine up to the processing facilities. A train system was replaced with a chain of belt conveyors. The main conveyors at this project are the tunnel conveyor PC 2 and the overland conveyor PC 3.
Tunnel conveyor PC 2
With 16,820 m pulley center distance and 471 m lift this conveyor is still one of the largest conveyors worldwide.
With the task to design an energy efficient system with reduced capital costs for belting and drives several investigations were made. The Hannover University in Germany was one of the scientific institutions where tests for indentation resistance and idler running resistance were carried out. An optimized conveyor design in combination with a suitable component selection was leading to a very low conveyor running resistances with a recalculated f-value of 0.009.
Overland conveyor PC 3
The overland conveyor PC 3 runs though the national forest with horizontal and vertical curves following the natural terrain.
Project figures overland conveyor PC2 underground/stationary
16,820 m / 471 m 1,219 mm 4 x 2,052 kW 1,420 m³/h – 2,500 st/h Customer Project name Feeder conveyor Xstrata Lomas Bayas 2011
Feeder conveyor system at Lomas Bayas pant in Chile
Belt Feeders are state of the art for emptying hoppers with crushed material. The belt runs at flat idler stations with maximum 0.5 to 0.7 m/s belt speed. The bulk material shape at the belt is rectangular defined by the spacing of the chute side walls and the adjustment of the shear gate. For longer transport distances (20 m and more) the material has to be transferred to a standard trough conveyor - a conveyor system with less chute wear and lower power demand.
The feeder conveyor
If the distances between hopper discharge and the next system feeding point is between 20 m and 75 m a feeder conveyor could be used as a combination of the feeder (hopper discharge) and conveyor. This type of conveyor has a standard trough shape (35° to 45° troughing angle) at the full length. Hopper side wall lengths are reduced to the discharge area section length only. A shear gate limits the material height at the belt. The shape of this shear gate defines the contour of the material surface. Feeder conveyors run with maximum 1.4 m/s belt speed and 80 % to 100 % capacity utilization. Compared to the combination between feeder and separate conveyor the feeder conveyor has lower CAPEX and OPEX because of the saving of a transfer point and the lower amount of friction between chute site walls and material.
48 m / 0 m 2,100 mm 2 x 200 kW 3,400 t/h Customer Project name Ust Luga KRUTRADE Oblast Leningrad 2001
In-plant conveyor system for stockyard in Leningrad oblast
Delivery of the complete in-plant conveyor system for stockyards including transfer towers, elevated structures, transfer chutes, trippers etc. Besides to the yard machines the stockyard as part of the Ust Luga port comprises:
- 11 transfer towers with complete transfer chute arrangement
- 16 belt conveyors from 90 m up to 520 m in pulley center distance
16 conveyors approx. 5,500 m overall length 11 1,600 mm 4,200 t/h Customer Project name Overland conveyor system Codelco Radomiro Sulfurus 2010
Overland conveyor with 8,120 m pulley center distance
Copper ore has to be moved from the crusher location to the processing facilities. The main conveyor at this project is the overland conveyor with 8,120 m pulley center distance. This conveyor is following the natural ground profile and runs in 63 % of its length in horizontal curves – partly in superposition with convex and concave curves. Up to 17° banking angle in combination with idler tilt are used to realize the steep horizontal curve radii.
8,120 m / -236 m 1,600 mm 3 x 1,300 kW 7,700 t/h
DELKOR FAST FP Filter Press Success in India
As of mid-June 2019, two DELKOR FAST FP filter presses, sold and supplied by DELKOR India, were successfully installed at a ferroalloy plant for Gas...
DELKOR’s Continued Thickener Success in Morocco
Tenova DELKOR’s office in India is pleased to announce the completion of another successful thickener project for a Tenova DELKOR’s office in India is...
DELKOR Horizontal Belt Filters Continuing to Deliver Exceptional Results in Australia
A recent spate of solid/liquid separation activity and requirement for reliable and cost-effective dewatering equipment in Australia has highlighted...
Questions? Enquiries? Ideas? Get in touch with us!Read More
In-Plant ConveyorsIn-plant conveyor systems are utilized within the mining, minerals processing and power generation industries to receive/ unload, stockpile, reclaim, and deliver ore, fertilizer, coal and a variety of other bulk material within a plant.
Tube ConveyorsEnvironmentally friendly bulk material transport is possible with tube conveyors.